Exposure Steps - Olivetti d-Copia 1600 Mode D'emploi

System Setting
EcoPrint

Exposure Steps

5-10
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 04.Initial
Dens.
3
Press [OK].
4
Press or and select Manual or Auto.
5
Press [OK]. The display will return to that of Step 2.
Selects the initial value of EcoPrint when the power is turned on. The initial
value of the EcoPrint can also be set to on (Enable).
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 05.EcoPrint.
3
Press [OK].
4 When EcoPrint is to be used as the initial value press
(Enable).
5 Press [OK]. The display will return to that of Step 2.
Changes the number of steps for the copy's exposure.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display 06.Density
steps.
3
Press [OK].
4 Press or and select 1 Step, or 0.5 Step.
5 Press [OK]. The display will return to that of Step 2.
System Menu:
04.Initial Dens.
System Menu:
05.EcoPrint
and select On
System Menu:
06.Density steps
OPERATION GUIDE