Care And Cleaning Of The Oven; Oven Vent; Cleaning Stainless Steel Surfaces - Samsung NE58H9970WS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND CLEANING OF THE OVEN

• Be sure all controls are OFF and all surfaces are COOL before
cleaning any part of the range.
WARNING
• If your range is moved for cleaning, servicing,
or any reason, be sure the Anti-Tip device
is re-engaged properly when the range is
replaced. If you fail to re-engage the Anti-Tip
device, the range could tip and cause serous
injury.

Oven vent

Cleaning painted parts and decorative trim
• For general cleaning, use a cloth with hot and soapy water.
• For more difficult residue and built-up grease, apply a liquid detergent directly
onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do
not use abrasive cleaners on any of these surfaces. They can scratch.

Cleaning stainless steel surfaces

1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.
2. Place a small amount of Stainless Steel Appliance Cleaner or polish on a damp
cloth or damp paper towel.
3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
• Do not use a steel-wool pad. It will scratch the surface.
• If a mineral oil-based stainless steel appliance cleaner has been used
before to clean the appliance, wash the surface with dishwashing liquid
and water prior to using the Stainless Steel Appliance Cleaner or polish.
Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 74
• The oven vent is located
Oven vent
below the control box.
• This area could become hot
during oven use.
• It is normal for steam to
come out of the vent.
• The vent is important for
proper air circulation. Never
block this vent.
English - 74
19/05/2014 18:21:37

Publicité

Table des Matières
loading

Table des Matières