Samsung NE58H9970WS Mode D'emploi page 35

Use Quality Cookware in Good Condition
• Cookware not centered on Cooking
Zone surface.
• Curved or warped pan bottoms or
sides.
• Pan does not meet the minimum
size required for the Cooking Zone
used. See the "Size of pans" section.
(page 37)
• Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
• Heavy handle tilts pan.
ANY one of the incorrect conditions listed above may be detected by the
sensors located below the ceramic cooktop surface. If the cookware does
not meet one or more of these conditions, one or more of the Cooking Zones
will not heat, and settings will flash in the affected Cooking Zone display.
Correct the problems before attempting to activate the cooktop.
Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 35
INCORRECT
English - 35
CORRECT
• Cookware centered correctly on
Cooking Zone surface.
• Flat pan bottom & straight sides.
• Pan size meets or exceeds the
recommended minimum size for the
Cooking Zone. See the "Size of pans"
section. (page 37)
• Pan rests completely on the Cooktop
surface.
• Pan is properly balanced.
19/05/2014 18:21:25