Olivetti d-Copia 120D Mode D'emploi page 56

2
Select two-sided copy mode.
Use the original to copy key to select the desired one-sided to two-sided
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 53.
3
Select the copy settings. See "SET THE COPY QUANTITY"
(p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.50),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.52).
Using the original table
If you are using the original table, copying is only possible in one sided to
two-sided mode ("A" above).
1
2
Using the SPF
Press the start (
54
Press the start (
The original is scanned into the unit's memory.
Place the original that you wish to copy onto the rear side of the
paper, and press the start (
Copying begins.
) key. Copying begins in the selected two-sided copy mode.
) key.
) key again.