Olivetti d-Copia 120D Mode D'emploi page 43

Using the OLIVETTI TWAIN
1
Place the original you wish to scan on the original table/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
2
After starting Desktop Document
Manager, click the "File" menu and
select "Select Scanner".
3
Select "OLIVETTI Personal MFP
Series", and click the "Select"
button.
If you use more than one scanning device, select the scanner
you want to use through the application. The method for
accessing the "Select Scanner" option, depends upon the
application. For more information, see the online manual or the
help file of your application.
4
Select "Acquire Image"
from the "File" menu, or
click the "Acquire" button
( ) .
5
Set the configuration for scanning (refer to the online manual
and help file), and click the "Scanning" button.
Scan is started.
Desktop Document Manager
Olivetti Personal MFP series 1.0 (32-32)
Olivetti d-Copia 150D 1.0 (32-32) WIA-SHARP SN-1555 1.0
Olivetti d-Copia 150D
Click here
Click here
4
Scanning
41