Unitron Quantum in-the-ear Mode D'emploi page 17

enabled on your hearing aids for the automatic
telephone program, both hearing aids are
synchronized and the listening program for
the opposite ear will also change when the
automatic telephone program is activated.
If the hearing aid does not switch to the
telephone program automatically when the
telephone receiver is placed in proximity, the
magnet for easy-t hearing aids should be
attached to the telephone receiver. The magnet
is designed to strengthen the magnetic field
at the ear piece of hearing aid compatible
telephones.
26
To affix the optional magnet:
1. Clean the telephone receiver.
Hold the magnet near
the "listening end" of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek
the optimal position on the
telephone receiver.
2. Place the double-sided tape
in this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.
Your hearing healthcare professional may also
have set up a phone program that you can
access through the push button on your hearing
aids, or through your optional remote control.
If your hearing aids are configured to work with
the wireless uDirect
™
you might benefit from a Bluetooth
free option. Refer to the uDirect 2 user guide
for more information.
® Bluetooth is a registered trademark of Bluetooth SIG Inc.
1.
2.
3.
2 neck worn accessory,
hands
®
27