NSK Ti-Max Z800L Manuel D'utilisation page 7

5. Connection & Disconnection of the Handpiece
Refer to Operation Manuals of coupling and hose before connecting the handpiece.
Z800L/Z800/Z900L/Z900
5-1 Connection
1) Insert the handpiece into the Coupling (Fig. 2).
2) Make sure the handpiece is firmly connected to the coupling.
5-2 Disconnection
Pull back the Retention Lock Ring and remove the handpiece from the Coupling (Fig. 2).
CAUTION
Do not operate the Retention Lock Ring while under drive air pressure. The high pressure may cause sudden release of the handpiece from
the coupling.
6
Retention Lock Ring
Handpiece Coupling
Fig. 2