NSK Ti-Max Z800L Manuel D'utilisation page 15

Chuck cleaning
Clean Push Button chuck once a week.
1) Mount the arrow-head spray nozzle tip into the spray can port.
2) Lubricate the chuck directly through the bur insertion hole (Fig. 10).
3) Lubricate handpiece by using NSK PANA SPRAY Plus (Fig. 9) or Care3 Plus.
CAUTION
If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released while in operation.
NSK Care3 Plus
When using NSK Care3 Plus automatic handpiece cleaning and lubrication system, refer to the Care3 System instructions.
14
Bur Insertion Hole
Arrow-head Spray Nozzle
Fig. 10