Installer Setting - Set Point Range Lock - LG PREMTB10U Manuel D'installation Et D'utilisation

INSTALLATION INSTRUCTIONS
86
Installer setting – Set point range Lock
It is a function that sets upper and lower bounds of the desired heating/cooling temperature con-
trollable from wired remote control.
The desired temperature can be set only in the range of the desired temperature set when the
desired temperature range locks.
But, the desired temperature value by central control unit or additional accessories reflects the
desired temperature received beyond the range.
Set point Set point
Lower Limit Upper Limit
If pressing button long for 3
1
seconds, it enters into
Set point range Lock installer setup
mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If moving to room temperature perception
2
sensor selection menu by pressing
button, it indicates as picture below.
Set point lock enable/ disable by pressing
3
button. (01: enable/ 00: disable)
enable/ disable
Function Code
Move to 'operation mode' setting
4
by pressing button.
Select operation mode to set the range
Press button to setup to 'operation
5
mode'.