Function Setting - Vane Angle Control - LG PREMTB10U Manuel D'installation Et D'utilisation

OPERATION INSTRUCTION
30

Function Setting - Vane Angle Control

This function is to adjust airflow angle.
• While adjusting the vane angle, a command from central controller, wireless remote con-
troller or dry contact, etc shall not be reflected in the system for 1 minute.
Press button until
1
icon flashes.
Press button to select active vane :
2
1 / 2 / 3 / 4 / All / Standard
Select Vane number using
❈ Vane number : No. 1, 2, 3, 4, all, or
standard
- Selected vane is in operation.
- Please verify the operating vane.
- To set the angle of all the vanes,
select 'all'.
- To set as the factory default settings,
select 'standard'.
Select wind angle using
3
and press button.
- The boundary of wind angle settings can
be changed to 5 levels or 6 levels
according to the product.
- When selecting 'standard' for Vane
number, the wind angle does not move.
Set the air flow angles for the remaining
4
vanes as the same as above.
❈ Some indoor units only have vane
numbers 1 and 2.
5 Press button to complete and
active the setting process.
(Airflow direction function will be
released whenever setting vane angle)
Press button to exit.
6
After setup, it automatically exits
after 60 seconds if there is no input.
If the Setting/Cancel button is not pressed,
the mode will not change.
buttons.
buttons,