Installation Instructions; Installer Setting - How To Enter Installer Setting Mode - LG PREMTB10U Manuel D'installation Et D'utilisation

INSTALLATION INSTRUCTIONS

Installer Setting - How to enter installer setting mode

• Some categories of the menu may not be displayed according to the function of the prod-
uct, or the menu name may be different.
CAUTION
!
Installer setting mode is to set the detailed function of the Thermostat.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by a certified installer. Any non-certified per-
sonnel attempting to install or make changes shall be responsible for any adverse effects
or operation.
INSTALLATION INSTRUCTIONS
Press and hold the
1
seconds to enter the Thermostat
installer setup mode.
- If it is not held for 3 second, it enters
into user setup mode instead.
When you enter the setting mode
2
initially, Function code is displayed on
the bottom of the LCD screen.
Function Code
63
button for 3
Value