Functional Description; Tool Assembly - Milwaukee 0100-20 Manuel De L'utilisateur

FUNCTIONAL DESCRIPTION

2
1
1. Chuck
2. Side handle*
3. Nameplate
4. Lock button
5. Trigger
6. Forward/Reverse switch
* Cat. Nos. 0200-20, 0202-20, 0299-20, 0300-20,
0301-20, 0302-20 only
3
6
5
8
To reduce the risk of injury,
always unplug tool before attach-
ing or removing accessories
or making adjustments. Use only
specifically recommended acces-
sories. Others may be hazardous.
Removing and Replacing Quik-Lok
Cords (Fig. 1) (Cat. No. 0100-20,
0101-20, 0202-20, 0301-20, 0302-20
4
MILWAUKEE 's exclusive Quik-Lok
provide instant field replacement or
substitution.
Fig. 1
1. To remove the Quik-Lok
cord nut 1/4 turn to the left and pull it
out.
2. To replace the Quik-Lok
connector keyways and push the con-
nector in as far as it will go. Turn the
cord nut 1/4 turn to the right to lock.

TOOL ASSEMBLY

WARNING!
To reduce the risk of injury, al-
ways use a side handle when us-
ing this tool. Always brace and
hold securely.
Adjusting the Side Handle (Fig. 2)
(Cat. No. 0200-20, 0202-20, 0299-20,
®
0300-20, 0301-20, 0302-20)
Fig. 2
®
Cords
® Cord, turn the
Locking keys
® Cord, align the
1. Turn the side handle counterclockwise
to loosen.
2. Slide the side handle assembly forward
over the chuck and rotate to the de-
sired angle.
3. Slide the side handle back to the
gearcase and position the locking keys
into the detents. The locking keys help
prevent the handle from slipping.
NOTE: The side handle ring must clear
the chuck.
4. Turn the side handle clockwise to
tighten.
NOTE: Always use the side handle for
best control.
9
WARNING!
Side handle
Gearcase
Detents
Side handle ring