Specific Safety Rules; Functional Description - Milwaukee 5378-20 Manuel De L'utilisateur

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Double Insulated
Alternating Current
Amps
No Load Revolutions per
Minute (RPM)
BPM
Blows per Minute (BPM)
Underwriters Laboratories, Inc.
Canadian Standards Association
Mexican Approvals Marking
4

SPECIFIC SAFETY RULES

Cat.
Volts
No.
AC
5378-20
120

FUNCTIONAL DESCRIPTION

3
2
1
Specifications
Tool
No Load
No Load Blows per
A RPM Minute
7.5 L o w 0 - 1350 22,000
High 0 - 2500 40,000
9
8
1. Side handle
2. Depth guage
3. Clamping lever
4. Hammer/Drill lever
5. Lock button
6. Trigger
7. Forward/Reverse lever
8. Speed selector
9. Chuck
Capacities
Drill Only Rotary Hammer
(steel or wood) (concrete)
Twist Carbide Tipped
Drill Percussion
Bit Bit
1/2" - 1-1/2" 5/8"
7
6
5
page 3