LaMotte WaterLink SpinTouch DW Mode D'emploi page 5

9. Choose an option.
¬ Tap to add a tag.
¬ Tap the highlighted
¬ Tap the hightlighted
¬ Tap the highlighted
10. Press and hold
NOTE: For water samples over 100 °F (38 °C) subtract 0.3 from pH result or, for the most accurate result,
wait until water sample is below 90 °F (32 °C) to test.
Remove residue daily. Residue will damage the meter and cause inaccurate results. See Cleaning.
SAVE, PRINT AND SEND TEST RESULTS Test results can be
saved, transferred to the WaterLink Connect 2 mobile app
via Bluetooth and sent to the BLE Mobile Printer (5-0067).
Test History Settings The WaterLink Spin Touch can log
test results for 250 water samples in the Test History. The
results for the most recent sample will be located at the top
of the list. All results can be logged automatically or results
for an individual sample can be logged after the sample has
been tested.
To turn on automatic logging, tap
Tap . Select Auto-Save Tests. Tap
the test screen. When Auto Save is selected
highlighted on the Test Results screen.
To manually log results for one sample at a time, Auto-Save
Tests must be disabled. If Auto-Save Tests is disabled
will be highlighted on the Test Results screen. After the test has been run, tap
results for that water sample to the Test History.
A user defined identification tag can be assigned
to an individual sample result. To enable tagging,
tap on the Test Screen. Tap
tags. Tap and
The tag can be up to 4 hexadecimal characters. It
cannot begin with a zero. To tag a test result, tap
on the bottom of the Test Results screen and
use the buttons to enter up to four characters. Tap
to erase a character. Tap
and return to the Test Results screen. Tap
return to the Test Results screen without saving
the tag. The tagged result will appear on the Test
Results screen and the Test History screen. The tag will be preceded by "T-".
Logged results are viewed in Test History. Controls for viewing and managing single or multiple
test records are located on the Test History screen. Tap the checkbox next to a test record to
select it, then tap one of the buttons along the bottom to perform an action with the selected
records.
Print or Send Results to a Bluetooth Phone or Tablet The WaterLink Spin Touch can print to the
Mobile Bluetooth Printer or send test results to a Bluetooth-enabled device such as a phone
or a tablet. The highlighted
connect to the printer and connect to a phone or tablet at the same time.
There are two modes of operation for connecting to the printer and a phone or tablet – Fast
Printer Connect ON and Fast Printer Connect OFF. The default mode is Fast Printer Connect
ON. Fast Printer Connect can be turned on or off from the Bluetooth Menu that is located in the
Settings Menu.
If Fast Printer Connect is ON, the meter will connect immediately to the printer upon recognizing
it. It will also connect to a phone or tablet but priority is given to the printer connection. The
to save the test results to the test log if Auto Save is not enabled.
to send the results to the enabled Mobile Bluetooth Printer.
to send the results to a Bluetooth enabled device.
for 2 seconds to turn the meter off.
on the Test Screen.
and
. Select Enable
to return to the test screen.
to save the tag
or will show which function is active. The Spin Touch cannot
FCL 1.98
TCL 1.98
CCL 0.00
pH 7.5
to return to
will not be
Tagging
Test History
00.35 16-Apr Treated DW13
00.22 16-Apr Treated DW13
21.44 16-Apr T-4650 Treated DW13
21.43 16-Apr Treated DW13
20.41 16-Apr T-ABC7 Treated DW13
20.36 16-Apr Treated DW13
to
Select All/ View
De-Select All Selected
Results
5
Test Results
Test Time 05:30:06 16-Apr-2020
ALK 98
HARDgpg 38.0
T IRON 1.1
COPPER 2.2
Transfer
Save Print
Results
Results Results
via
Bluetooth
(Not Available)
to save the
Delete History Home
Selected Settings
Results Select
Auto Save
Return
to Test
Screen
Go to Top
Scroll up
or down
the test
list by 5
entries
Go to Bottom