Blade Replacement - Cembre B-TC500ND-SC Notice D'utilisation Et Entretien

4. BLADE REPLACEMENT

When changing blades, the battery must fi rst be removed from the tool.
After extended use, the blades may lose their cutting edge.
Replace the blades as follows:
Operate the motor so to advance the ram until the pins (12) of the blades are visible (Fig. 5a) and
then remove the battery.
Remove circlips (13) and extract the pins (12); to ease the operation it may be necessary to fold
back the rubber hand grip (3).
Remove the nut (15), 2 spacers (17), 2 pins (18) so to extract the central pin (19) and free the blades.
Disassemble the blade guide (1) keeping aside the screw (14).
Assemble the new blades (2) the pivot (19) and pins (18).
Lock the pin (19) with the nut (15) washer (16) and spacer.
Assemble the 2 pins (12) and lock them with circlips (13).
Assemble the blade guide (1).
At the end of the operation, press on the pressure release button to withdraw the ram.
5. CONNECTION TO COMPUTER (Smartool technology)
The memory card integrated in the tool records operating data for transfer via the USB cable supplied.
To view and manage this data, go to www.cembre.com and register in the dedicated area, then
download the free Cembre software CEM_SWBT01.
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
6. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
---------------------------------------------------------------------------------------------------------------------------------------
Following information applies in member states of the European Union:
USER INFORMATION in accordance with "Directives 2002/95/EU and 2002/96/EU.
The 'Not in the bin' symbol above when shown on equipment or packaging means that the equip-
ment must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed
guidelines for its separate collection. Appropriate waste separation, collection, environmentally com-
patible treatment and disposal is intended to reduce harmful environmental eff ects and promote
the reuse and recycling of materials contained in the equipment. Unlawful disposal of such equip-
ment will be subject to the application of administrative sanctions provided by current legislation.
9
(Ref. to Fig. 5)