Cleaning The Cutter Blade And Frame - Oki PT390 Manuel D'utilisation

8-4. Cleaning the Cutter Blade and Frame

If the printer printed on full-sheet label paper, any adhesive
matter adhering to the cutter blade and frame must be removed.
Even when label paper has been cut normally, clean the cutter blade
at an interval of about once a month to ensure stability in cutting.
Note: Although the edge of the cutter blade is not as sharp as the edges of utility
knives generally used in offices, there is a risk of injury to a hand or finger
that is moved while pressed against the cutter blade edge. Take care to
avoid injury when cleaning the cutter blade.
Items required for cleaning
- Flathead screwdriver (small)
- General-purpose utility knife
Cleaning sheet
(Product No.: 0631260)
37