Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 100

C-4.Setup Items

Setup group items
No.
Setup group item
1
MEMORY SWITCH
2
CUSTOMIZE VALUE
3
SERIAL INTERFACE
CONDITION
4
OTHER
5
RETURN TO SETUP MENU
Setup items and their details
(1) MEMORY SWITCH setup items
No.
Item
1
POWER ON
STATUS
2
RECEIVE
BUFFER
3
BUSY
CONDITION
4
RECEIVE
ERROR
5
AUTO LF
6
DSR(#6)
RESET
7
INIT(#25)
RESET
8
INIT(#31)
RESET
9
COVER
OPEN
ERROR
10
BM CHECK
AT POW-ON
11
RETURN TO
UP
12
RETURN TO
SETUP
MENU
Enters the mode for MEMORY SWITCH-related settings.
Enters the mode for CUSTOMIZE VALUE-related
settings.
Enters the mode for SERIAL INTERFACE
CONDITION-related settings.
Enters the mode for other types of settings.
Returns to the setup mode menu.
Explanation
- Specifies reporting the power-on state.
- Specifies the capacity of the receive buffer.
- Status designation when printer turn is busy.
BUFFERFULL:
Turns busy when receive buffer is full.
OFFLINE/BUFFERFULL:
Turns busy when receive buffer is full or off-line.
- Specifies how to handle receive errors
- This item is valid only for the serial interface.
- Specifies automatic line feed using the CR code.
- This item is valid only for the Parallel interface.
- Specifies the reset operation using the DSR (#6)
signal.
- This item is valid only for the serial interface.
- Specifies the reset operation using the INIT (#25)
signal.
- This item is valid only for the serial interface.
- Specifies reset using the INIT (#31) signal.
- This item is valid only for the parallel interface.
- Specifies how to handle a cover open error during
printing.
AUTO RECOVERY:
When a cover is closed, Printer is recovery
automaticity.
RECOVERY BY CMND:
When a cover is closed, Printer is recovery by
command.
- Specifies the adjustment of the leading edge of the
paper at power-on.
- This item is valid only when the black mark
detection unit is installed and "BM sensor installed"
is set.
- Returns the menu to the selection mode for setup
group items.
- Returns the menu to the setup mode menu.
Explanation
85
Detail Setup Item
ENABLE
DISABLE
45BYTE
4KBYTE
BUFFERFULL
OFFLINE/BFUU
ERFULL
IGNORE
?PRINT
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
AUTO
RECOVERY
RECOVERY BY
CMND
ENABLE
DISABLE
-
-

Publicité

Table des Matières
loading

Table des Matières