Oki PT390 Manuel D'utilisation page 82

4. In setup mode, select "SETTING."
Press and hold down the FEED switch for one second or longer to accept the
selection.
The printer prints the following when you accept the selection of
"SETTING":
5. Select "CUSTOMIZE VALUE" as your option.
Press the FEED switch briefly (one second or less) until the item
"CUSTOMIZE VALUE" is reached.
MEMORY SWITCH
PRTURN To SETUP MENU
OTHER
SERIAL INTERFACE CONDITION
CUSTOMIZE VALUE
MEMORY SWITCH
SELECTION ITEM
CUSTOMIZE VALUE
↑
MEMORY SWITCH
PRTURN To SETUP MENU
OTHER
SERIAL INTERFACE CONDITION
CUSTOMIZE VALUE
MEMORY SWITCH
SELECTION ITEM
80