Oki PT390 Manuel D'utilisation page 79

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 100
9. Select "RETURN TO SETUP MENU" as your option.
Press and hold down the FEED switch for one second or longer to accept the
selection.
The printer prints the following when you accept the selection of "RETURN
TO SETUP MENU":
10. Select "SAVE&END" as your option.
Press the FEED switch briefly (one second or less) until the item
"SAVE&END" is reached.
Then, press and hold down the FEED switch for one second or longer to accept
the selection.
The printer cuts the paper and exits from setup mode when you accept the
selection of "SAVE&END."
Note: If you turn off the printer power switch without first selecting
"SAVE&END," your setting will be lost.
- Verifying your setting
To verify your setting, execute a test print, referring to Section C-1.
The test printing prints a list of printer settings. Check the list, and
verify your setting.
SETTING
SAVE&END
DEFAULT SET
SETUP PRINT
SETTING
SELECTION ITEM
SAVE&END
DEFAULT SET
SETUP PRINT
SETTING
SAVE&END
DEFAULT SET
SETUP PRINT
SETTING
SELECTION ITEM
77

Publicité

Table des Matières
loading

Table des Matières