Ac Adapter And Thermal Roll Paper; Ac Adapter; Paper Specification (Thermal Paper) - Oki PT390 Manuel D'utilisation

2. AC Adapter and Thermal Roll Paper

2-1. AC adapter

Only use the AC adapter specified below.
Model name:
Input:
Output:
Caution: Only use authorized AC adapters.
Caution: Do not use the bundled AC adapter and Power cable for any

2-2. Paper specification (Thermal paper)

Be sure to use thermal roll paper that conform to the following specifications.
- Paper width: For paper 83mm wide, 83
- Outside diameter:
- Core diameter:
- Printed surface: Outside of the roll
- Treatment of end of paper:
Note: Do not use rolls that have rough sides or sides from which pieces of paper
extrude. Using such rolls could cause a printer failure.
KA02951-0120
100 to 240V AC, 50/60Hz-
DC24V±5%, 1.5A
electrical equipment other than this printer.
For paper 60mm wide, 60
For paper 75 to 90µm thick, 102mm or less
For paper 90 to 150µm thick, 90mm or less
For paper 75 to 90 m thick, 12±0.5mm (inside)
/18±0.5mm (outside)
For paper 90 to 150µm thick, 25.4±0.5mm (inside)
/32±0.5mm (outside)
end of the paper must also not be folded back.
0 mm 80mm wide, 80
-1.0
0 mm 58mm wide, 58
-1.0
The roll paper must not be glued to the core. The
6
0 mm
-1.0
0 mm
-1.0