4. MAINTENANCE
4.1.3 Optional Cutter Module
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure yourself
while cleaning.
The disc cutter is available as an option. When removing the Cutter Cover
of the disk cutter unit, remove the screws from the bottom of the cover.
1. Loosen the two Plastic Head Screws to remove the Cutter Cover.
2. Remove the jammed paper.
3. Clean the Cutter with a soft cloth slightly moistened with alcohol.
4. Attach the Cutter Cover.
E4- 3
Plastic Head Screw
4.1 Cleaning
Cutter Unit