Oki LE840 Guide De L'utilisateur page 20

2. PRINTER SETUP
2.3.1 Loading the Media
(Cont.)
NOTE:
Do not over-tighten the Locking
Ring of the Supply Holder.
In the case of labels rolled with
the print side facing inside.
8.
Place the media between the Media Guides and adjust them to the
media width. Once in the correct position tighten the Locking
Screw.
9.
Check that the media's path through the printer is straight. The
media should be to the left side of the print head
Media Guide
Locking Screw
E2- 6
In the case of labels rolled with
the print side facing outside.
Print Head
Media
Media Guide
2.3 Loading Supplies
Paper Guide