Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
O
PERATION
Output Window Height
The Output Window Height defines the height in pixels that the video output will be limited to.
1.
Access the
Output Window
2.
Turn the <MENU/ENTER> knob until Height (V) is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
height, from 64–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
Output Window Horizontal Offset
The Output Window Horizontal Offset defines how far to the right the limited video output will be offset on
the connected panel assembly.
1.
Access the
Output Window
2.
Turn the <MENU/ENTER> knob until Start X is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
Output Window Width
offset will only be able to be set as much as the difference between the current
Output Window Width and the maximum Output Window Width. For example: If the
maximum Width is 1280, and the current Width is set to 1080, the offset can be set
from 0–200.
Output Window Vertical Offset
The Output Window Vertical Offset defines how far down the limited video output will be offset on the
connected panel assembly.
1.
Access the
Output Window
2.
Turn the <MENU/ENTER> knob until Start Y is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
Output Window Height
offset will only be able to be set as much as the difference between the current
Output Window Height and the maximum Output Window Height. For example: If the
maximum Height is 1280, and the current Height is set to 1080, the offset can be set
from 0–200.
Image Offset
The Image Offset setting allows the video output to be offset without altering the scaling from the input. To
access the Image Offset menu:
1.
Access the
Output Settings
2.
Set
Scaling
to Disable.
3.
Turn the <MENU/ENTER> knob until Image Offset is selected.
4.
Press the <MENU/ENTER> knob.
Horizontal Image Offset
The Horizontal Image Offset defines how far to the right the unscaled video output will be offset on the
connected panel assembly.
1.
Access the
Image Offset
2.
Turn the <MENU/ENTER> knob until Start X is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The size of the connected panel assembly must be smaller than the unscaled input
video to use this setting. The offset will only be able to be set as much as the
difference between the input resolution and the size of the connected panel
assembly. For example: If the input resolution extends horizontally past the panel
assembly by 200 pixels, the Horizontal Image Offset can be set from 0–200.
VIP Drive 43Nova User Manual Rev. 3
menu.
menu.
must be less than maximum to use this setting. The
menu.
must be less than maximum to use this setting. The
menu.
menu.
Screen
Settings)
Output Window
Width)
Output Window
Height)
Input
Settings)
18
Publicité
Table des Matières
