Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
O
PERATION
PIP Horizontal Offset
To set the PIP horizontal offset:
1.
Access the
Picture In Picture
2.
Turn the <MENU/ENTER> knob until Start X is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
PIP Width
able to be set as much as the difference between the current PIP Width and the
maximum PIP Width. For example: If the maximum Width is 1920, and the current
Width is set to 1020, the offset can be set from 0–900.
PIP Vertical Offset
To set the PIP vertical offset:
1.
Access the
Picture In Picture
2.
Turn the <MENU/ENTER> knob until Start Y is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
PIP Height
be able to be set as much as the difference between the current PIP Height and the
maximum PIP Height. For example: If the maximum Width is 1080, and the current
Height is set to 680, the offset can be set from 0–400.
PIP Crop
The PIP Crop settings allow the VIP Drive 43Nova to select a specific area of the video to be output to the
connected panel assembly. To access the PIP Crop menu:
1.
Access the
Picture In Picture
2.
Turn the <MENU/ENTER> knob until PIP Crop Settings is selected.
3.
Press the <MENU/ENTER> knob.
To enable or disable PIP Crop:
1.
Access the
PIP Crop
2.
Turn the <MENU/ENTER> knob until PIP Crop Settings is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise to select Enable, or counter-clockwise to select
Disable.
5.
Press the <MENU/ENTER> knob.
PIP Crop Width
The PIP Crop Width stretches or zooms in on the video horizontally, without altering the dimensions of the
PIP itself on the connected panel assembly.
1.
Access the
PIP Crop
2.
Turn the <MENU/ENTER> knob until Width (H) is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
width, from 64–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
PIP Crop Height
The PIP Crop Height stretches or zooms in on the video vertically, without altering the dimensions of the
PIP itself on the connected panel assembly.
1.
Access the
PIP Crop
2.
Turn the <MENU/ENTER> knob until Height (V) is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
height, from 48–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
VIP Drive 43Nova User Manual Rev. 3
menu.
must be less than maximum to use this setting. The offset will only be
menu.
must be less than maximum to use this setting. The offset will only
menu.
menu.
menu.
menu.
PIP
Width)
PIP
Height)
Input
Settings)
Input
Settings)
22
Publicité
Table des Matières
