Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
O
PERATION
Advanced Attributes
The Advanced Attribute settings control menu display brightness and the screen timeout function.
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Advanced Attr is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select either OLED
Brightness or Go Homepage(S).
5.
Press the <MENU/ENTER> knob.
6.
For:
•
OLED Brightness, Turn the <MENU/ENTER> knob clockwise or counter-clockwise to
increase or decrease the menu display brightness, from 5–15.
•
Go Homepage(S), Turn the <MENU/ENTER> knob clockwise or counter-clockwise to
increase or decrease the number of seconds the menu can be inactive before reverting to
the Home Screen, from 30–3600.
7.
Press the <MENU/ENTER> knob.
Firmware Version
To view the firmware version, access the
until Firmware Version shows on the display.
Communication Settings
The Communication Settings determine interface port priority and TCP/IP configuration. To access the
Communication Settings menu:
1.
Press <MENU> or the <MENU/ENTER> knob to access the main menu.
2.
Turn the <MENU/ENTER> knob until Communication Settings is selected.
3.
Press the <MENU/ENTER> knob.
Communication Mode
The Communication Mode determines the priority of the interface ports. If both USB and ethernet are
plugged in to the VIP Drive 43Nova, the connection selected as preferred will take precedence over the
other.
1.
Access the
Communication Settings
2.
Turn the <MENU/ENTER> knob until Communication Mode is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select either USB Preferred
or LAN Preferred.
5.
Press the <MENU/ENTER> knob.
Network Settings
The Network Settings configure the IP address and Subnet Mask of the product. To access the Network
Settings menu:
1.
Access the
Communication Settings
2.
Turn the <MENU/ENTER> knob until Network Settings is selected.
3.
Press the <MENU/ENTER> knob.
IP Mode
The IP address and Subnet Mask can be configured automatically or manually. To set how these settings
should be configured:
1.
Access the
Network Settings
2.
Turn the <MENU/ENTER> knob until Config IPV4 is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select either Manually or
Auto.
5.
Press the <MENU/ENTER> knob.
VIP Drive 43Nova User Manual Rev. 3
menu.
Advanced Settings
menu and turn the <MENU/ENTER> knob
menu.
menu.
menu.
26
Publicité
Table des Matières
