Color Wheel; Offset Mode - Chauvet Professional Maverick MK1 SPOT Manuel D'utilisation

Color Wheel

Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path
and the pan and tilt movements. This allows the moving parts to not show any border or to reduce the light
output when in their home position. To access this mode, follow the instructions below:
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode 2323 using the buttons:
a. Use <DOWN> to select the number to be changed.
b. Use <UP> to increase the value.
c. Repeat until 2323 has been entered.
3. Press <ENTER>.
4. This brings you into the Zero Adjust menu screen.
PAN
1. Use <UP> or <DOWN> to select PAN.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
TILT
1. Use <UP> or <DOWN> to select TILT.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
COLOR
1. Use <UP> or <DOWN> to select COLOR.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO
1. Use <UP> or <DOWN> to select GOBO.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO ROTATE
1. Use <UP> or <DOWN> to select GOBO ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
Page 30 of 191
Color number
1
2
3
4
5
6
7
Maverick MK1 Spot User Manual Rev. 9
Operation
Description
Sailboat
Wavy bar
Dot crickets
Nuts and bolts
Linear ovals
Star field
Shower glass