Ip Address; Subnet Mask; Personality - Chauvet Professional Maverick MK1 SPOT Manuel D'utilisation

Operation

IP address

To set the IP address, do the following:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select IP, or touch the display where it says IP.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following methods:
• Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed. Use
the number pad on the display to enter the desired number.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the IP address is set as desired.
• With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed.
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired
7. Press <ENTER>.

Subnet mask

To set the Subnet Mask, do the following:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask.
5. If using the buttons instead of the touchscreen, press <ENTER>
6. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following
methods.
• Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed. Use
the number pad on the display to enter the desired number.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the Subnet Mask is set as desired.
• With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the Subnet Mask is set as desired.
7. Press <ENTER>.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.

Personality

To set which DMX personality to use, do the following:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it
says Personality.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 22CH or DMX 29CH, or touch the
display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES (confirm), or touch the
display where it says the desired option.
7. Press <ENTER>.
Maverick MK1 Spot User Manual Rev. 9
Home Screen shows on the display. Press <ENTER>.
Home Screen shows on the display. Press <ENTER>
Home Screen shows on the display. Press <ENTER>.
Page 15 of 191