Fan Speed; Dimmer Curve; Dimmer Speed; Pulse Width Modulation - Chauvet Professional Maverick MK1 SPOT Manuel D'utilisation

Operation

Fan speed

To set the speed of the fans, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fan mode), or touch the display where it says
the desired option.
5. Press <ENTER>.

Dimmer curve

To set the dimmer curve, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer
Curve.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Square or SCurve, or
touch the display where it says the desired option.
5. Press <ENTER>.

Dimmer speed

To set the dimmer speed, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.

Pulse Width Modulation

To set the PWM frequency, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select PWM Option, or touch the display where it says PWM Option.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the PWM frequency, from 600Hz, 1200Hz,
2000Hz, 4000Hz, 6000Hz, or 15000Hz, or touch the display where it says the desired option.
5. Press <ENTER>.

Preset select

This option saves three different preset menu option configurations. To record and set these presets, follow
the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are
saved to PRESET A without having to do anything.
•
To create a new preset, highlight and select PRESET SELECT
or PRESET C and press
will reset automatically. Go back and make the changes you need to make in the
menu. This will automatically save to the preset you are in.
Maverick MK1 Spot User Manual Rev. 9
menu.
menu.
menu.
menu.
menu.
<ENTER>
. When you make that selection, the product
.
Highlight PRESET B
Page 19 of 191