Table des Matières
Publicité
White Balance
Dimmer Speed
Mode
Temperature
Setting
Fan Mode
NEXT NXT-1 User Manual Rev. 7
To set the white balance of the NEXT NXT-1:
1.
Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2.
Use <UP> or <DOWN> to select System Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select White Balance.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from Red, Green, or Blue.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to increase or decrease that color's value, from 125–255.
9.
Press <ENTER>.
To set the dimmer speed mode:
1.
Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2.
Use <UP> or <DOWN> to select System Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Dimmer Mode.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from Off, Dimmer 1 (fast), Dimmer 2 (medium), or
Dimmer 3 (slow).
7.
Press <ENTER>.
To select which unit to view the product temperature as:
1.
Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2.
Use <UP> or <DOWN> to select System Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Temperature Unit.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from °C (Celsius) or °F (Fahrenheit).
7.
Press <ENTER>.
To set the fan mode:
1.
Press <MENU/ESC> repeatedly to reach the main level of the display menu.
2.
Use <UP> or <DOWN> to select System Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Fan Mode.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from Auto Speed (the fan speed will react to the product
temperature) or High Speed (the fan will always be at maximum speed).
7.
Press <ENTER>.
Operation
-31-
Publicité
Table des Matières
