1. Manuels
  2. Marques
  3. Chauvet Professional Manuels
  4. Équipement d'éclairage
  5. Maverick MK2 Profile
  6. Manuel d'utilisation

Offset Mode - Chauvet Professional Maverick MK2 Profile Manuel D'utilisation

Masquer les pouces Voir aussi pour Maverick MK2 Profile:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Operation

Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path
and the pan and tilt movements. This allows the moving parts to reduce the light output or to not show any
border when in their home position. To access this mode, follow the instructions below:
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode 2323 using one of the following methods:
•
Through the touchscreen: Use the number pad on the screen to enter 2323.
•
With the buttons:
a.
Use <DOWN> to select the number to be changed.
b.
Use <UP> to increase the value.
c.
Repeat until 2323 has been entered.
3. Press <ENTER>.
4. This brings you into the Zero Adjust menu screen.
PAN
1. Use <UP> or <DOWN> to select PAN.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
TILT
1. Use <UP> or <DOWN> to select TILT.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
COLOR
1. Use <UP> or <DOWN> to select COLOR.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO
1. Use <UP> or <DOWN> to select GOBO.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO ROTATE
1. Use <UP> or <DOWN> to select GOBO ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO 2
1. Use <UP> or <DOWN> to select GOBO 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO 2 ROTATE
1. Use <UP> or <DOWN> to select GOBO 2 ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FOCUS 1
1. Use <UP> or <DOWN> to select FOCUS 1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FOCUS 2
1. Use <UP> or <DOWN> to select FOCUS 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
Maverick MK2 Profile User Manual Rev. 3
Page 32 of 209

Publicité

Table des Matières
loading

Manuels Connexes pour Chauvet Professional Maverick MK2 Profile

Contenu connexe pour Chauvet Professional Maverick MK2 Profile

Table des Matières