Xerox Phaser 6180MFP Guide De Configuration page 7

Macintosh USB Installation
Insert the Software and Documentation CD-ROM. Run the
VISE installer to completion. Select the components you wish to install.
Macintosh OS X 10.2.x and 10.3.x (Bonjour/Rendezvous)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Select USB from the drop-down menu.
4. Select the printer in the printer's window.
5. Select Xerox from the list of manufacturers in the lower drop-down
menu.
6. Select the Phaser 6180MFP from the list of available printers.
7. Click the Add button.
Macintosh OS X 10.4.x and Higher (Bonjour)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Click the Default Browser button.
4. Select the Phaser 6180MFP from the list of available printers.
5. Click the Add button.
Setting Up the Printer Features Connecting
over Ethernet (Network)
The following section will help you:
■
Set up a shared folder.
■
Create an address for the scanner.
■
Set up the SMTP Server.
■
Create an email Address.
■
Set up scanning to an FTP Server.
■
Set up the fax.
■
Add individual and group addresses to your Fax Address Book.
Step 1: Setting Up a Shared Folder
Windows: To share a folder on a Windows operating system:
1. Open a Windows Explorer window.
2. Right-click the folder you want to share, and then select
Properties.
3. Click the Sharing tab, and then click Share this folder.
Phaser® 6180MFP Multifunction Printer
Macintosh USB Installation
EN - 5