Xerox Phaser 6180MFP Guide De Configuration page 13

2. Double-click on the Server icon to open the Server Address dialog
box.
3. If you want to change the automatically assigned address ID, click
the Specify an Address Number check box, and then enter a value
from 1 to 32 for the Address ID.
4. In the Name field, enter the name you want this address to appear
under in the Address Book.
5. Select the Computer (SMB) option.
6. Click the Computer Settings wizard button.
7. Enter the folder where you want to scan in the Save In Folder field,
or click the Browse button to locate an existing folder. Selecting an
existing folder from the Browse button will automatically populate
the Shared Folder and Share Name fields when Use a network
shared folder as the Save In folder and Auto Share are checked.
8. Click OK to select the appropriate folder.
9. Click Next. The Computer Folder User Settings dialog box
opens.
10. Enter the name and password that you log in with.
11. Select the Use Scan Service User check box to allow user access
only to the shared directory they create.
12. Click Next.
13. Click Finish to confirm the new settings. The Computer Settings
wizard closes. The Server Address dialog box will automatically
populate with the information you just set.
14. Enter the Path for forwarding scans.
15. Clear the Use Default Port Number check box to enter the Port
Number used by Server Type. The default values are:
■
SMB: 139
■
FTP: 21
16. Click OK.
The Address Book is saved with the new entry for your computer.
You are now ready to scan images to the network computer.
Note: For more information about the Address Book Editor, click the
Help button while in the editor.
Phaser® 6180MFP Multifunction Printer
Setting Up the Printer Features Connecting over USB
EN - 11