Xerox Phaser 6180MFP Guide De Configuration page 14

Alternate Step 1: Using the Address Book Editor to Create
an Address (Macintosh)
Note: If your computer is connected to the printer through USB only,
you do not need to do the steps in this section.
To create an address to a folder on your computer where your printer
can scan images directly:
1. Open the Applications folder, and then select Xerox/
Phaser6180MFP/Address Book Editor.
2. In the left navigation panel of the Address Book Editor, double-
click the Server icon and then select New. The Server Address
dialog box opens.
3. In the Name field of the Server Address dialog box, enter the
name that you want this address to appear under in the Address
Book.
4. Click the Computer (SMB) option button.
5. Type your IP address in the Server Name / IP Address field.
6. Type your short name in Share Name field.
7. Type the name and password that you log in with in the Login
fields.
8. Type your password in the Confirm Login Password field.
9. If you are using the default port number, select the Use Default
Port Number check box. If you are not using the default port
number, type the port number in the Port Number field.
10. Confirm the settings, and then click OK.
11. On the File menu, select Save.
The address book is saved with the new entry for your computer and you
are now ready to scan images to the network computer.
Step 2: Using the Express Scan Manager to Set Up USB
Scanning
Note: The express Scan Manager Software must be installed.
1. Windows: On the Start menu, select All Programs/Xerox/
Phaser 6180MFP/Express Scan Manager. Then click OK.
Macintosh: From the Application folder, click Xerox/
Phaser 6180MFP, and then double-click Express Scan Manager.
2. Click Browse and locate the Output Destination folder.
3. Click OK.
Phaser® 6180MFP Multifunction Printer
Setting Up the Printer Features Connecting over USB
EN - 12