Signal Connection; Art-Net™ Connection; Sacn Connection; Kling-Net Connection - Chauvet Professional Maverick MK3 Wash Manuel D'utilisation

Setup

Signal Connection

The Maverick MK3 Wash can receive DMX, WDMX, Art-Net™, sACN, or Kling-Net signal. The
Maverick MK3 Wash has two Amphenol XLRnet through ports, and 3- and 5-pin DMX in and out ports.
For more information about DMX, read the DMX primer at:
https://www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP, which transfers a large amount of DMX512 data using
an Amphenol XLRnet RJ45 connection over a large network. An Art-Net™ protocol document is available
from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Streaming ACN, also known as ANSI E1.31, is an Ethernet protocol that uses the layering and formatting
of Architecture for Control Networks to transport DMX512 data over IP or any other ACN-compatible
network. ACN is maintained by the Professional Lighting and Sound Association (PLASA).

Kling-Net Connection

Kling-Net is a network protocol that allows auto configuration of display devices using an Amphenol
XLRnet RJ45 Ethernet connection. Refer to the ArKaos software manual for detailed instructions on
programming this product.
ArKaos Kling-Net does not support the pan and tilt functions, and must be paired
with another protocol for full functionality with the Maverick MK3 Wash.

Connection diagram

Computer/
Controller
(running
Art-Net™, sACN,
or Kling-Net
protocol)
The three LED indicators in between the Ethernet through ports indicate a connection
to a network and activity on that network. They do not indicate whether or not the
Maverick MK3 Wash is receiving a signal from a controller.
Maverick MK3 Wash User Manual Rev. 7
Switch or Router
(such as the NET-Switch from
CHAUVET Professional)
Maverick MK3
Wash
Other Art-Net™, sACN, or Kling-Net devices
Page 7 of 323