Signal Connection; Art-Net™ Connection; Sacn Connection; Kling-Net Connection - Chauvet Professional Maverick Storm 1 Wash Manuel D'utilisation

Setup

Signal Connection

The Maverick Storm 1 Wash can receive DMX, WDMX, Art-Net™, sACN, or Kling-Net signal. The
Maverick Storm 1 Wash has two Ethernet ports, and 5-pin DMX in and out ports. For more information
about DMX, read the DMX primer at:
https://www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf
For instructions on pairing the Maverick Storm 1 Wash with a WDMX transmitter, see
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using an
Ethernet connection over a large network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Streaming ACN, also known as ANSI E1.31, is an Ethernet protocol that uses the layering and formatting
of Architecture for Control Networks to transport DMX512 data over IP or any other ACN-compatible
network. ACN is maintained by the Professional Lighting and Sound Association (PLASA).

Kling-Net Connection

Kling-Net is a network protocol that allows auto configuration of display devices using an Ethernet
connection. Refer to the ArKaos software manual for detailed instructions on programming this product.
ArKaos Kling-Net does not support the pan and tilt functions, and must be paired
with another protocol for full functionality with the Maverick Storm 1 Wash.

Connection Diagram

Computer/
Controller
(running Art-Net™,
sACN, or Kling-Net
protocol)
Maverick Storm 1 Wash User Manual Rev. 2
Switch or Router
(such as the NET-Switch from
CHAUVET Professional)
Maverick
Storm 1 Wash
Other Art-Net™, sACN, or Kling-Net devices
WDMX Reset.
Page 7 of 306