Reset Functions; Factory Reset; System Information - Chauvet Professional Maverick MK3 Wash Manuel D'utilisation

Masquer les pouces Voir aussi pour Maverick MK3 Wash:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Operation

Reset functions

To reset the pan, tilt, or all functions as if from startup:
1.
Navigate to the
2.
Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP> or <DOWN> to select the function to reset, from Pan, Tilt, or All, or touch the display
where it says the desired option.
5.
If using the buttons instead of the touchscreen, press <ENTER>.
6.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or
touch the display where it says the desired option.
7.
Press <ENTER>.

Factory reset

To restore the Maverick MK3 Wash to factory default settings, do the following:
1.
Navigate to the
2.
Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3.
If using the buttons instead of the touchscreen, press <ENTER>.
4.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5.
Press <ENTER>.

System information

All information about the current status of the Maverick MK3 Wash is available through the product's Sys
Info menu. To view this information, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Sys Info, or touch the display where it says
Sys Info.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running
mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error
Information (shows any errors or No Error!), or Channel Information (shows the current value
of all signal input channels), or touch the display where it says the desired option.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to scroll through the information.
Maverick MK3 Wash User Manual Rev. 7
Setup
menu.
Setup
menu.
Home Screen
shows on the display. Press <ENTER>.
Page 58 of 323

Publicité

Table des Matières
loading

Table des Matières