Preset Select; Preset Sync; Reset Functions; Factory Reset - Chauvet Professional MAVERICK MK2 SPOT Mode D'emploi

Preset select

This option saves three different preset menu option configurations. To record and set these presets, follow
the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are
saved to PRESET A without having to do anything.
•
To create a new preset, highlight and select PRESET SELECT
or PRESET C and press
will reset automatically. Go back and make the changes you need to make in the
menu. This will automatically save to the preset you are in.

Preset sync

To sync all menu presets to other Maverick MK2 Spots, follow the instructions below:
1. Connect all Maverick MK2 Spots via DMX cable.
2. Navigate to the Settings
3. Use <UP> or <DOWN> to select Preset Sync, or touch the display where it says Preset Sync.
4. If using the buttons instead of the touchscreen, press <ENTER>.
5. Select YES, or touch the display where it says the desired option.
6. Press <ENTER>.
•
To sync other
• The product can be in any control mode except WDMX. ArtNet, DMX, and
sACN are all acceptable.
• All menu options are transferred, including the DMX address. Only the IP
address is not affected in the other products.

Reset functions

To reset the pan, tilt, prism, iris, color, gobo, zoom, focus, frost, or all functions as if from startup:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset Function.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Pan/Tilt, Iris/Prism, Color/CMY+CTO, Gobo/
Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
7. Press <ENTER>.

Factory reset

To restore the Maverick MK2 Spot to factory default settings, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5. Press <ENTER>.
Page 20 of 189
menu.
<ENTER>
. When you make that selection, the product
menu.
Maverick MK2 Spot
s, connect them with a DMX cable.
menu.
menu.
.
Highlight PRESET B
Maverick MK2 Spot User Manual Rev. 11
Operation