Web Server - Chauvet Professional MAVERICK MK2 SPOT Mode D'emploi

MAC Address
1. Use <UP> or <DOWN> to select MAC4, MAC5, or MAC6.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the value, from 000–255.
4. Press <ENTER>.

Web Server

The Maverick MK2 Spot Web Server can be accessed by any computer on the same network as the
product. It allows network access to system information and settings (e.g., control setup, manual testing of
all functions, firmware updates, and the ability to change the Web Server password).
1. Connect the product to power, and set the
2. Connect the product to a Windows
3. On the computer, set the IP address of the new network to have the same first 3 digits as the IP
address of the product (see
4. Enter the IP address of the product into the URL bar of a Web browser on the computer.
5. Enter both the User Name and Password as admin to log in.
Information
The Information page on the Web Server displays the current settings and the system information of the
Maverick MK2 Spot.
Setup
The Setup page on the Web Server provides options for control, similar to the Setup menu on the product.
Click Save Settings to send the new configuration to the product.
Manual test
The Manual Test page on the Web Server allows all output functions of the product to be controlled through
the browser. To set all functions back to default, click Reset.
Firmware update
The Upgrade page on the Web Server allows the product to be updated with the latest firmware. Go to
https://www.chauvetprofessional.com/products/maverick-mk2-spot/
Security
The Security page on the Web Server gives the option to change the password to the connected product's
Web server. Enter the old password (admin, by default) and the new password twice, then click Submit to
change the password.
Page 32 of 189
IP mode to Static.
®
computer with a network cable.
IP address).
to download firmware updates.
Maverick MK2 Spot User Manual Rev. 11
Operation