Functional Description - Bosch PHO 3100 Notice Originale

OBJ_BUCH-406-001.book Page 16 Monday, August 27, 2007 5:23 PM
16 | English

Functional Description

Read all safety warnings and all in-
structions.
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
rebating.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Planing depth scale
2 Depth adjustment knob
3 Chip ejector (alternatively right/left)
4 Lock-off button for On/Off switch
5 On/Off switch
6 Belt cover
7 Screw for belt cover
8 Chip ejection selector lever
9 Planer base plate
10 V-grooves
11 Blade drum
12 Clamping element for blade
13 Fastening screw for planer blade
14 Carbide blade (TC)
15 Allen key
16 Extraction hose ( Ø 35 mm)*
17 Chip/dust bag*
18 Parallel guide
19 Scale for rebating width
20 Locking nut for adjustment of rebating width
21 Fastening bolt for parallel and beveling guide
22 Angle stop*
23 Locking nut for angle adjustment
24 Fastening bolt for rebating depth stop
25 Rebating depth stop*
2 609 140 473 | (27.8.07)
Failure to follow the
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Dr. Egbert Schneider
Senior Vice President
Engineering
31.05.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
26 Park rest
27 Drive belt
28 Large pulley
29 Small pulley
Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
Dr. Eckerhard Strötgen
Head of Product
Certification
PHO 3100
3 603 B71 ...
W 750
W 420
rpm 16500
0 – 3.1
mm
0 – 9
mm
mm 82
kg 2.6
/ II
Bosch Power Tools