Sleep Timer - Telestar M 12i Manuel D'utilisation

7. SETTINGS
E
Choose the preferred function here and confirm by
pressing on the volume switch on the device or pressing the OK
button on the remote control.
Eco Standby
In this mode, the device consumes very little power in standby
mode. The clock is not shown in standby mode in that case.
Standby with clock
In this mode, the time is displayed during standby when you switch
off the device using the standby button.
The power consumption increases slightly.
If you press and hold the standby button, you activate
Eco Standby mode.
Auto standby
In this mode, the device automatically switches to standby after
a set time if no operation has been performed during this period.

7.2.6. Sleep timer

The sleep timer function can be used to automatically switch the
radio into standby mode.
Here you can determine the amount of time until the device auto-
matically switches off.
Operating Manual 118
bda_TELESTAR_M12i_01_20_V5_DE_EN_F_NL_I_.indd 118 17.02.2020 11:31:44