Combination Cooking Process "Convection; Auto Menu; Starting The Auto Menu - SilverCrest SMW 900 EDS B3 Mode D'emploi

Combination cooking process
"Convection"
This function combines the convection function
with the normal microwave operation. With this,
for example, meat is juicy and tender but still crisp.
Fire hazard!
Never use the grill stand t or other metallic objects
when you are using the microwave for combined
cooking processes. Metals reflect the microwave
radiation and it leads to the generation of sparks.
This could cause a fire and irreparably damage
the appliance!
1. Press the Combination microwave-convection
button 9
"200C" and the symbols
in the display 1.
2. Now set the required temperature using the
rotary knob r
or 200°C. Confirm your selection by pressing
the Start/quick start button r
3. Now set the required cooking time using the
rotary knob r
time is 95 minutes. Press the Start/quick start
button r
to confirm the set cooking time.
The combination process starts. The symbols for the

combination cooking process "Convection"

appear on the screen 1. The programmed time
counts backwards. Once the set time has expired,
"End" and "Hot" are shown alternating in the dis-
play 1. A signal tone is heard repeatedly.
. The preset temperature
and appear
: 110°C, 140°C, 170°C
.
. The maximum cooking

Auto menu

For foods to be prepared in automatic menu mode,
it is not necessary to enter the cooking time or power
setting. It is quite sufficient to enter which type of
food is to be cooked/boiled, and its weight.
Fire hazard!
Under NO circumstances may you use covers or
non-heat-resistant dishes for programmes with
enabled Grill function (A-01, A-02, A-03, A-04,
A-05), as they can melt or catch fire!
Note:
The microwave will calculate the time/power level
for fresh foods. Deep-frozen foods will not be
cooked properly using the times specified by
the microwave (with the exception of the "Pizza"
automatic programme).
If needs be, defrost frozen foods with the defrost
programme beforehand (see section "Defrosting").

Starting the Auto menu

Turn the rotary knob r
1.
mode) slowly to the left to call up the automa-
, tic menu mode. A number (e.g. "A - 02" for
automatic programme 2 (pork)) and the "Pork"
symbol appear in the display 1. Turn the
rotary knob r
automatic menu for your food.
Note:
If you have entered automatic menu mode by
turning the rotary knob r
can turn the rotary knob to the right afterwards
to select the automatic menus in the sequence of
A01, A02, A03... .
- 18 -
(in standby
to select the appropriate
to the left, you