Convection Operation; Convection Operation With Preheating - SilverCrest SMW 900 EDS B3 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Convection operation

When cooking with convection, hot air circulates in
the cooking compartment. Convection is especially
recommended for cooking souffles or crunchy foods.
You can set a temperature of between 110°C and
200°C and a duration of max. 95 min.
Press the Convection button 0
1.
(= 200°C) appears in the display 1 along
with the symbol for convection operation
Use the rotary knob r
2.
temperature and confirm your selection by
pressing the Start/quick start button r
3.
Now set the required cooking time using the
rotary knob r
Press the Start/quick start button r
4.
start the cooking process.
The symbol for convection operation
in the display 1. The programmed time counts back-
wards. Once the set time has expired, "End" and
"Hot" are shown alternating in the display 1.
A signal tone is heard repeatedly.
. "200C"
to set the required
.
to
appears

Convection operation with preheating

You can also preheat your microwave before you
start a cooking process:
1.
Select the required temperature by pressing the
Convection button 0
knob r
NOT need to confirm this setting by pressing
the Start/quick start button r
2.
To start preheating, press the Convection but-
ton 0
.
and the symbol for convection operation
flashes. The countdown begins. Assumes the
.
set temperature is reached, signal tones will
sound and the time will stop.
3.
Open the door and place the foods to be
cooked inside.
Turn the rotary knob r
4.
rature and confirm the temperature by pressing
the Start/quick start button r
5.
Now set the required cooking time using the
rotary knob r
cooking time setting is 95 minutes.
Press the Start/quick start button r
6.
start the process.
The symbol for convection operation
in the display 1 permanently. The programmed time
counts backwards. Once the set time has expired,
"End" and "Hot" are shown alternating in the dis-
play 1. A signal tone is heard repeatedly.
- 17 -
and use the rotary
to set the temperature. You do
. "30:00" appears in the display 1
to set the tempe-
. The maximum possible
.
.
to
appears

Publicité

Table des Matières
loading

Table des Matières