Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Displaying maximum/minimum temperature/
humidity
Once the power supply and the connection to the outdoor sensor
have been established, the maximum and minimum values for
temperature and humidity are automatically recorded and saved
by the weather station.
♦
In basic mode, press the
appears on the two displays (
for the humidity and the highest measured values for in-
doors and outdoors are displayed.
♦
In basic mode, press the
appears and the lowest measured values for indoors and
outdoors are displayed.
♦
After around 5 seconds, the current values for indoors and
outdoors will automatically be displayed.
♦
Press and hold the
delete the saved values.
Changing the temperature unit
On delivery, the temperature unit is preset to degrees Celsius ( ).
♦
In basic mode, press the
the temperature units (
the indoor and outdoor temperature displays.
♦
Press the °C/°F button
on the display
AHFL 433 A1
button
and
button
button
for about 3 seconds to the
button
or
). The unit changes for both
to change the temperature unit
of the outdoor sensor.
once. The
symbol
) next to the display
twice. The
symbol
to switch between
GB │ IE
│
45
■
Publicité
Chapitres
Table des Matières
Dépannage
