Vortice QE-B I/M Notice D'emploi Et D'entretien page 55

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
ENGLIsH
QE-spf
Aesthetic wall spacer frame(fig. 21÷24)
Fig.21: QE SPF assembly to cover adapter QE FBA.
Fig.22: QE SPF assembly to cover the irregular edges of holes in walls.
Fig.23: QE SPF assembly to hide a protrusion from the plasterboard box (rear discharge).
Fig.24: Final assembly: position the front QE panel on the QE-SPF frame.
QE-cfr
Infill frame (fig. 25÷26)
Hides imperfections due to an incorrectly finished installation on a plaster or on tiles or in openings on recesses
that are too large that the QE would not be able to cover completely. The frame is mounted between the wall
and the front part of the QE.
QE-srK
Kit for extraction from a second room (fig. 27÷32)
Fig 27
0 wall recessed box
1 wall flange
2 filter
3 frame
4 front panel
Fig 28
A.Maximum depth of recess: 40 mm
B.Optional screws: if used, it is necessary to drill the holes on the rear pre-recessed wall of the wall flange
56

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Qe-b i/m vk90

Table des Matières