Safety Consciousness On The Job - Wilo Star STG Notice De Montage Et De Mise En Service

German
2.2 Personnel qualifications
The installation, operating and maintenance personnel must
have the appropriate qualifications for this work. Area of respon-
sibility, terms of reference and monitoring of the personnel are to
be ensured by the operator. If the personnel are not in possession
of the necessary knowledge, they are to be trained and
instructed. This can be accomplished if necessary by the manu-
facturer of the product at the request of the operator.
2.3 Danger in the event of non-observance of the safety
instructions
Non-observance of the safety instructions can result in risk of
injury to persons and damage to the environment and the prod-
uct/unit. Non-observance of the safety instructions results in
the loss of any claims to damages.
In detail, non-observance can, for example, result in the follow-
ing risks:
• danger to persons from electrical, mechanical and bacteriolog-
ical influences,
• damage to the environment due to leakage of hazardous mate-
rials,
• property damage,
• failure of important product/unit functions,
• failure of required maintenance and repair procedures.
2.4

Safety consciousness on the job

The safety instructions included in these installation and oper-
ating instructions, the existing national regulations for accident
prevention together with any internal working, operating and
safety regulations of the operator are to be complied with.
20 WILO SE 11/2012