EBARA 2SP MFC 1,5T-2 Instructions Pour L'installation Et La Maintenance page 53

32 AL1
33 AL2
34 AL4
35 AL5
36 AL6
37 AL8
38 AL9
39
48 Panel enabled (with inverter or pressure switches)
49
50 Panel enabled with pressure switches
51 Panel enabled for inverter functioning
52 Presence of alarms
53
54
55
64 Pump enabled
65 Pump running
66
67 Pump inverter supply
68 Fault pump
69
70
71
In the condition of plant disabled, disabled pumps and no presence of alarms, all the indicated bits are at the logic state 0.
Address
0008 Enabled of the plant
Set to 0 or 1 for disabled or not the plant.
0 --> plant disabled
1 --> plant enabled
0111 Reference 1 pressure
Set the work pressure value in Bar, the set with the front panel display (1.1 Val1 Setpoint) remains however active.
2nd Part: Reading the status bit - modbus command "0x02"
Alarms 1/2
Panel Status
Pump 2 status
3rd Part: Command parameters - modbus command "0x06"
ENGLISH
AL16 – Fault inverter - see 0039 for the fault code
40
AL16 – Fault inverter - connection lost
41
42 AL32
43 AL64
44 AL65
45 ALH20
46
47
56 Pump enabled
57 Pump running
58
59 Pump inverter supply
60 Fault pump
61
62
63
72 Pump enabled
73 Pump running
74
75 Pump inverter supply
76 Fault pump
77
78
79
Description
53
Alarms 2/2
Pump 1 status
Pump 3 status
Factor
Bar x10