Set-Up; Channels; Date - Consort C731 Mode D'emploi

SET-UP

Procedure to pre-set the different channels and their possibilities
according your applications.
[CH1=PH]
[CH1=MV]
[CH1=OFF]
[EC=ON] / [EC=OFF]
[AtC=ON] / [AtC=OFF] : Automatic temperature compensation
[MtC=ON] / [MtC=OFF] : Manual temperature compensation
1. Press SET until the display shows [SEt CHAn] ( choosing channels)
and press CAL to continue (skipped when starting from a measuring
mode).
2. The display shows [CH1=PH], [CH1=MV] or [CH1=OFF]. Select the
desired mode for channel-1 with
or SET to return.
3. Go on in the same way with all next channels by repeating the proce-
dure from point 2. Allways press CAL to continue or SET to return.
4. The display shows [EC=on] or [EC=OFF]. Select the desired mode for
the conductivity channel with
SET to return.
5. This step is skipped unless the conductivity channel is on. The
display shows [AtC=on], [MtC=on] or [AtC=OFF], [MtC=OFF]. Switch
the temperature compensation on or off (for absolute measurements)
with or and press CAL to continue or SET to return.
6. The display shows [rEF=25°C] or [rEF=20°C]. Select the temperature
to which all future conductivity measurements will be referred with
or and press CAL to continue or SET to return.
Procedure to change or display the date. When switched off, the date
remains resident in the memory for logging and printing purposes.
1. Press SET until the display shows [SEt dAtE] and press CAL to
continue.
2. The display shows [dAtE=on] or [dAtE=OFF]. Select the desired
mode with or
3. Program the date with
pressing CAL each time (or press SET to return).
: pH-measurement
: mV-measurement
: Channel switched off
: Conductivity
or
or and press CAL to continue or
and press CAL to continue or SET to return.
or (respectively year, month and day) by
and press CAL to continue

Channels

Date

4