Picking Up Liquids; After Finishing Work; Switching The Vacuum Cleaner Off And Storage - Makita 447 M Notice D'utilisation

MAKITA 447 M
english
Type of dust
• Nonhazardous dust
• No wood dust
• Dust with
≥ 0.1 mg/m³
• Observe any additional national
regulations
• Dust with MAC values
≥ 0.1 mg/m³ and wood dust

5.1.2 Picking up liquids

Do not pick up flammable
substances.

6 After finishing work

6.1 Switching the vacuum
cleaner off and storage
8
Filter bag/waste bag
MAC values
Before liquids are picked up,
always remove the filter bag/
waste bag and check that the
water level limit works properly.
(See section 7.2.3 "Replacing
the filter element".)
The use of a separate filter el-
ement or filter screen is recom-
mended.
MAKITA 447 M
Waste bag Waste disposal:
No. W 302001311 1. Remove hose with tool sleeve from tool
2. Thorough cleaning - see section 4.5
3. Waste disposal - see section 7.2.1
Filter bag Waste disposal - see section 7.2.2
No. W 302001138
Handling/waste disposal
If foam appears, stop work im-
mediately and empty the tank.
To reduce the amount of foam,
use foam killer Foam-Stop (see
section 9.5 „Accessories" for or-
der number).
1. After picking up hazardous
dust, vacuum clean the out-
side of the cleaner.
2. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
3. Wind up the power cord and
hang it on the handle.
4. Empty the tank and clean the
vacuum cleaner.
5. After picking up liquids: Store
the upper section of the
cleaner separately so that
the filter element can dry.
6. Store the vacuum cleaner in
a dry room where it is pro-
tected from unauthorized
use.