Basic Operations; Playing A Cd - Sony CDP-XA555ES Mode D'emploi

Basic Operations

Playing a CD

Connect the
headphones.
Adjust the
headphones volume.*
• See pages 4 – 5 for hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can set
the timer to play at any time.
If "– – – – –" appears in the
display
Place the supplied stabilizer
on the CD.
If you do not, this indication
appears.
Note
In Step 3, be careful not place
two or more CDs on the disc
tray.
Otherwise, you may damage the
discs and/or the player.
If play doesn't start from the
first track
Press PLAY MODE
repeatedly until
"SHUFFLE," "PROGRAM"
and "CUSTOM INDEX"
disappear from the display
(or press CONTINUE on the
remote).
GB
6
2
PLAY
ANALOG OUT
MODE REPEAT TIME
PHONE LEVEL
PHONES
EDIT/
TIME FADE FILE ERASE
MIN MAX
1
Turn on the amplifier and select the CD player position.
2
Press U to turn on the player.
3
Press § OPEN/CLOSE, and place a CD on the tray.
With the label side up
4 Press (.
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
3 4
CHECK CLEAR FILTER
OPEN/CLOSE
* The output level from the ANALOG OUT
(VARIABLE) jacks will also change.
Place the supplied stabilizer on the
CD.
AMS
PUSH ENTER