Introduction; Conventional Radio Systems; Cp150™/Cp200™ Radio Features; Radio Wide Features - Motorola Commercial Série Manuel De L'utilisateur

INTRODUCTION

CONVENTIONAL RADIO SYSTEMS

Conventional radio systems typically refer to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple users,
each radio user must monitor the channel or
repeater before transmitting to verify that the
system is not currently busy.
CP150™/CP200™ RADIO
FEATURES

Radio Wide Features

• 4 or 16 Channels
• 2 Programmable Feature Buttons
• Busy Channel Lockout
• High/Low Power Settings (Available for 4W
& 5W models only)
• Repeater/Talkaround
• Voice Operated Transmit
• Transmit Time-Out Timer
• Monitor and Sticky Monitor
• System Scan with Single Priority Scan

Signaling Features

• MDC 1200 Signaling (Available for 4W &
5W models only)
- Selective Radio
Inhibit Decode
- Radio Check
Decode
• Quik-Call II Signaling (Available for 4W &
5W models only)
- Call Alert
Decode
• DTMF Signaling
- DTMF PTT ID
Encode
- PTT ID Decode
- PTT ID Encode
- Selective Inhibit
Decode
- Selective Call
Decode
9
English